- BLACKMAGIC MULTIDOCK SOFTWARE MAC OS X
- BLACKMAGIC MULTIDOCK SOFTWARE DRIVER
- BLACKMAGIC MULTIDOCK SOFTWARE PRO
Even though you get all four disks connected to a single USB Type-C connection, you can also split the MultiDock 10G and get two disks on one USB Type-C port and two disks on the second port. MultiDock 10G features a completely independent disk interface chip per disk slot, so you never get slowdowns because of SATA bandwidth issues. That's more than enough bandwidth to handle 8K resolution in H.265 from the optional HyperDeck Extreme 8K. MultiDock 10G uses advanced USB Type-C technology so you get fast transfer speeds to your computer at up to 10 Gb/s with a single cable connection.
BLACKMAGIC MULTIDOCK SOFTWARE DRIVER
Best of all, the driver is built into the operating system so no extra software is required. With MultiDock 10G it's possible to plug in any brand of 2.5" SSDs, or, if you need high-capacity backup at low cost, a regular 2.5" laptop hard disk can be used. You can even stripe multiple disks together for a superfast RAID array. It's also a suitable solution for adding SSD compatibility to the HyperDeck Extreme 8K, as it will let you interchange disks between HyperDeck Studio models.
BLACKMAGIC MULTIDOCK SOFTWARE PRO
Blackmagic MultiDock 10G can be used for accessing media recorded with the URSA Mini Pro SSD Recorder. Because the MultiDock features four independent disk slots, you can mount all your media from a shoot all at the same time.
BLACKMAGIC MULTIDOCK SOFTWARE MAC OS X
Simply plug in your SSDs and they will connect to your Mac OS X and Windows computers like regular hard disks. The MultiDock 10G supports up to four independent 2.5" SSDs so it's possible to edit directly from the disks you recorded onto. Plus, the built-in AC power supply provides the power to run four SSDs or hard disks, at the same time. The rear panel offers two USB Type-C connections and a slide switch to allow selecting between using four disk slots on a single USB Type-C port, or two slots on each port for shared use. Simply plug into any USB Type-C Mac or Windows computer port and begin using it without any software installation needed. The design is also repairable so you can replace the socket connector in each slot.
Each disk slot has an illuminated disk indicator so you can see when disks are being accessed. The MultiDock 10G features a 1 RU all-metal design for use in any professional rack. It can also be used simultaneously with two HyperDeck Extreme units (see below).
The MultiDock has a 1 RU rackmount design and can be installed right on top of the HyperDeck Extreme in a rack or console for a seamless workflow. The MultiDock 10G works well with the optional HyperDeck Extreme 8K in various recording and playback workflows thanks to the matching USB Type-C External Disk port on the HyperDeck. You can connect directly to a Mac or Windows computer that has a USB Type-C port, and no software needs to be installed and used in the process. Up to four 2.5" disks can be accessed over a single 10 Gb/s USB Type-C interface, while an independent SATA driver chip on each disk slot ensures fast transfer speeds. Blackmagic MultiDock 10G is designed as a fast, 4-slot SSD dock that you can use to edit directly from your media disks.
0 kommentar(er)
